This 1.2m (4ft) x 100mm x 75mm concrete repair spur is designed to reinforce a damaged or rotten wooden fence post without needing to replace the entire fence. Manufactured from steel-reinforced concrete with three pre-drilled holes, the spur is installed beside the existing post and coach screwed securely into place.

Concrete repair spurs are a cost-effective way to extend the life of your fence by 5–10 years, saving you the expense of replacing panels, rails, or gravel boards.

Specifications

• Length: 1.2m (4ft)

• Section: 100mm x 75mm

• Material: Steel-reinforced concrete

• Fixing holes: 3 pre-drilled for coach screws and washers

• Usage: Reinforces damaged or rotten wooden fence posts

The post Concrete Repair Spur 1.2m x 100m x 75mm appeared first on Clarke Fencing.

Designed with a recessed section to hold timber in place and a built-in fixing hole, this post allows for secure and accurate installation of decking joists or framework timbers.

Concrete construction ensures the post is resistant to moisture, rot, and ground conditions, offering a long-lasting and low-maintenance solution for outdoor projects.

Ideal for use in decking installations, raised platforms, and garden structures, these posts provide reliable support where ground contact is required.

Specifications

• Height: 600mm

• Material: Concrete

• Features: Recessed timber seat and fixing hole

• Benefits: Durable, rot resistant, no cutting required

• Suitable for: Decking support, timber frameworks, garden builds

How do you install concrete deck support posts?

Dig a hole approximately 300mm deep and position the post in place. Use Postcrete to secure the post, ensuring it is set firmly and allowed to fully set before continuing.

Once set, place your timber into the recessed section and fix it securely using the pre-formed hole. Build your decking frame from this point, making sure all posts are level and aligned to avoid an uneven or wonky deck.

The post 600mm Concrete Decking Support Post appeared first on Clarke Fencing.

Each post features a recessed section to sit timber securely, along with a pre-formed fixing hole to allow timbers to be fixed firmly in place. This ensures a stable and secure connection between the post and decking framework.

Manufactured from durable concrete, these posts are resistant to moisture, rot, and ground contact, making them ideal for long-term outdoor use.

Perfect for supporting decking frames, joists, and garden structures, these posts offer a practical and low-maintenance alternative to timber supports.

Specifications

• Height: 450mm

• Material: Concrete

• Features: Recessed timber seat and fixing hole

• Benefits: Lightweight, no cutting required, rot resistant

• Suitable for: Decking frames, joists, garden structures

How do you install concrete deck support posts?

Dig a hole approximately 300mm deep and position the post in place. Use Postcrete to secure the post, ensuring it is set firmly and allowed to fully set before continuing.

Once set, place your timber into the recessed section and fix it securely using the pre-formed hole. Build your decking frame from this point, making sure all posts are level and aligned to avoid an uneven or wonky deck.

The post 450mm Concrete Decking Support Post appeared first on Clarke Fencing.

Concrete universal posts also known as multi-holed posts.

Measuring 100mm x 100mm, each post has four internal steel reinforcing bars, a four way top and holes every 150mm down the front and back of the post. These posts have many uses, most commonly used with closeboard fencing.

Cant rail is fixed to the posts using M10 X 160mm Cup Square Hex Bolts, where the rails are then joined with a timber connectors.

The post 2.7m Multi-Hole Concrete Fence Post (Universal) 9ft appeared first on Clarke Fencing.

Concrete universal posts also known as multi-holed posts.

Measuring 100mm x 100mm, each post has four internal steel reinforcing bars, a four way top and holes every 150mm down the front and back of the post. These posts have many uses, most commonly used with closeboard fencing.

Cant rail is fixed to the posts using M10 X 160mm Cup Square Hex Bolts, where the rails are then joined with a timber connectors.

The post 2.4m Multi-Hole Concrete Fence Post (Universal) 8ft appeared first on Clarke Fencing.

Concrete universal posts also known as multi-holed posts.

Measuring 100mm x 100mm, each post has four internal steel reinforcing bars, a four way top and holes every 150mm down the front and back of the post. These posts have many uses, most commonly used with closeboard fencing.

Cant rail is fixed to the posts using M10 X 160mm Cup Square Hex Bolts, where the rails are then joined with a timber connectors.

The post 1.8m Multi-Hole Concrete Fence Post (Universal) 6ft appeared first on Clarke Fencing.

This 2.40m wet cast recessed concrete fence post is designed for feather edge fencing up to 1.8m high, the most common height for privacy fencing. The recessed mortice allows cant rails to be securely bolted into position using roofing bolts, creating a strong and durable fencing system.

Designed to work with recessed concrete gravel boards, these posts protect timber from ground moisture and ensure a clean, professional finish. Wet cast concrete construction offers excellent durability and long-term performance in exposed garden and boundary applications.

The post 2.40m Recessed Concrete Fence Post – Wet Cast (To Suit 1.8m Fencing) appeared first on Clarke Fencing.

This 3.10m wet cast recessed concrete fence post is designed to support feather edge fencing up to 2.4m high. The morticed recess allows cant rails to be securely fixed using roofing bolts, providing a strong and stable fencing structure for taller boundary installations.

Compatible with recessed concrete gravel boards, these posts ensure proper alignment while protecting timber from ground contact. Wet cast concrete provides maximum strength and durability, making these posts ideal for commercial fencing, security fencing, and high privacy boundary applications.

The post 3.10m Recessed Concrete Fence Post – Wet Cast (To Suit 2.4m Fencing) appeared first on Clarke Fencing.

This 2.05m wet cast recessed concrete fence post is designed to support feather edge fencing up to 1.5m high. The recessed mortice allows cant rails to be securely fixed using roofing bolts, ensuring a strong and professional fencing system.

Compatible with recessed concrete gravel boards, this installation method protects timber fencing components from ground contact and prolongs fence lifespan. Wet cast concrete provides superior structural strength, making these posts ideal for standard garden boundaries and privacy fencing.

The post 2.05m Recessed Concrete Fence Post – Wet Cast (To Suit 1.5m Fencing) appeared first on Clarke Fencing.

This 1.75m wet cast recessed concrete fence post is designed to support feather edge fencing up to 1.2m high. The morticed recess allows cant rails to be securely bolted to the post using roofing bolts, providing a strong and reliable fencing structure.

Designed for use with recessed concrete gravel boards, these posts create a flush installation while protecting timber from ground moisture. Wet cast concrete construction ensures excellent strength and durability, making these posts suitable for residential boundaries and medium-height garden fencing.

The post 1.75m Recessed Concrete Fence Post – Wet Cast (To Suit 1.2m Fencing) appeared first on Clarke Fencing.