Suited for use with 3FT to 4FT high fence panels, this post is strong, clean-looking, and maintenance-free. Its internal steel reinforcement ensures long-term stability, while the dry cast concrete provides consistent quality and resistance to cracking, rot, or weather damage.

Compatible With

This intermediate post works best with:

• Closeboard Fence Panels – especially in 3FT–4FT heights

• Lap Panels

• Concrete Gravel Boards

• Postmix – approx. 1.5 bags per post

• Other Concrete Fence Post Sizes

Key Features

• 6FT (1.8M) dry cast concrete post with twin slots

• Designed for straight fencing runs

• Strong, reinforced core for long-term support

• Natural grey finish suits most garden designs

• Rot-proof and zero maintenance

Installation Guidance

Dig a hole around 600mm deep and 200–250mm wide. Ensure the post is vertically plumb using a spirit level, then set it using Postcrete for fast and secure fixing. The post will hold a standard 6FT-wide panel and can be paired with a concrete gravel board for added protection from ground moisture.

Additional Help & Resources

Need help building your fencing run or selecting components?

How to Choose and Install Closeboard Fence Panels

The post 6ft (1.8m) Slotted Intermediate Concrete Fence Post – Dry Cast appeared first on Clarke Fencing.

Compact Support for Low-Level Fence Panels. The 5FT Intermediate Concrete Fence Post – Dry Cast (1.5M) is the ideal choice for supporting shorter fencing panels in front gardens, driveways, or low-perimeter boundaries. Designed with dual slots, this post allows panels to be fixed securely between sections while maintaining a clean, consistent line.

At 1.5 metres (5FT), it’s best suited to fencing panels between 2FT and 3FT in height, especially when no gravel board is used or when minimal post burial is required. It’s a great option when working within planning restrictions or simply aiming for a more open and decorative finish.

Constructed using a high-strength dry cast method and internally reinforced with steel, this post offers long-lasting support without warping, rotting, or the need for maintenance.

This low-height intermediate post is suitable for:

• 3ft Heavy Duty Closeboard Fence Panels Pressure Treated Green

• 3ft Lap Fence Panels

• 6 Inch Concrete Gravel Boards – optional for added protection

• Postmix – approx. 1 bag per post

• 6FT Slotted End Concrete Fence Post 

Key Features

• 5FT (1.5M) intermediate post with slots on both sides

• Ideal for short fencing runs or decorative boundaries

• Steel-reinforced and rot-proof

• Dry cast finish for consistent strength and appearance

• Minimal visual bulk compared to taller posts

Installation Guidance

Dig a hole approximately 600mm deep and 200–250mm wide. Set the post in place using Postcrete and ensure it is plumb and aligned with your run. These posts are designed to slot standard 6FT-wide panels securely between each upright, resting optionally on a concrete gravel board.

Need help choosing the right panel for your boundary?

How to Choose and Install Closeboard Fence Panels

The post 5ft (1.5m) Slotted Intermediate Concrete Fence Post – Dry Cast appeared first on Clarke Fencing.

Its extended length makes it suitable for high-wind locations, elevated ground, or fencing that requires stepped installation. Steel reinforcement and dry cast manufacturing ensure long-lasting performance without rot or deterioration.

Compatible With

• Closeboard Fence Panels – 6FT or stepped

• 6FT Lap Panels

• Concrete Gravel Boards

• Postmix – 2+ bags per post

• Other Concrete Fence Post Sizes

Key Features

• 9FT (2.7M) intermediate post with twin slots

• Designed for 6FT panel widths

• Perfect for sloped or stepped installations

• Steel-reinforced dry cast concrete

• Maintenance-free and rot-proof

Installation Guidance

Dig a hole approx. 600mm deep and 250mm wide. This deeper depth offers better support for high panels and prevents leaning over time. Align using a level and fix with Postcrete.

How to Choose and Install Closeboard Fence Panels
Installing Concrete Posts on a Slope

The post 9ft (2.7m)Slotted Intermediate Concrete Fence Post – Dry Cast appeared first on Clarke Fencing.

Dry cast concrete provides a consistent, robust finish, while internal steel reinforcement gives the strength needed to support panels and gravel boards over time. This 6FT post is commonly used with 3FT or 4FT tall fencing, especially in areas with height restrictions or where privacy isn’t a primary concern.

Compatible With

This end post works seamlessly with:

• 3FT 6Inch Heavy Duty Closeboard Fence Panels Pressure Treated Brown  

• 4FT Lap Fence Panels

• 6 Inch Concrete Gravel Boards

• Postmix – use approx. 1.5 bags per post

• 6FT Slotted Corner Concrete Fence Post

Key Features

• 6FT (1.8M) dry cast concrete post with single slot

• Designed for use at the end of a fence run

• Reinforced with internal steel for long-lasting support

• Maintenance-free and rot-resistant

• Natural grey finish for a classic garden look

Installation Guidance

Dig a hole approximately 600mm deep and 250–300mm wide. Add a layer of gravel for drainage, then position the post using a level. Pour in Postcrete and allow it to set firmly. Slot your panel into the recessed side and rest it on a suitable gravel board, if using.

This post is ideal for completing fencing runs with shorter panels. For taller fences, consider viewing our full range of post sizes.

Need More Help?

For more guidance on choosing the right fencing setup for your garden, check out:
How to Choose and Install Closeboard Fence Panels

The post 6ft (1.8m) Slotted End Concrete Fence Post – Dry Cast appeared first on Clarke Fencing.

This post is especially useful when fitting 6FT high panels with a gravel board, or where extra post depth is needed for firm anchoring. Made using the dry cast method and reinforced with internal steel rods, it delivers exceptional durability without any need for ongoing maintenance.

Compatible With

Perfect for use with:

• Closeboard Fence Panels – especially 6FT and 5FT 6in sizes

• Lap Panels

• Concrete Gravel Boards

• Postmix – approx. 2 bags per post

• Other Concrete Fence Post Sizes

Key Features

• 8FT (2.4M) dry cast concrete post with one slot

• Provides strong end support for tall fencing runs

• Ideal when installing 6FT panels with gravel boards

• Internally reinforced with steel for strength

• Resistant to rot, insects, moisture, and frost

Installation Guidance

Dig a hole around 600mm deep and 200–250mm wide. Place the post at the end of your fencing line with the open slot facing inward. Set in place using Postcrete, checking alignment with a level or string line. This height is also suitable for sloped gardens where deeper burial is required to match stepped panel levels. We recommend pairing with a concrete gravel board to protect the bottom of your fence from moisture and damage.

Extra Guidance

• How to Choose and Install Closeboard Fence Panels

• Installing Concrete Posts on a Slope

The post 8ft (2.4m) Slotted End Concrete Fence Post – Dry Cast appeared first on Clarke Fencing.

Intermediate posts feature slots on both sides, allowing fence panels to slide in seamlessly and securely between runs. This 2.4m length is the ideal size for 6ft panels when allowing for a recommended 2ft burial depth.

Whether you’re building a garden boundary or replacing timber posts, these concrete posts offer a maintenance-free alternative that won’t rot or warp over time.

Compatible with:

• Closeboard Fence Panels

• Lap Panels

• Concrete Gravel Boards

• Postcrete – approx. 1.5 to 2 bags per post

Key Features

• 8FT (2.4M) length for use with 6FT high fencing

• Dry cast concrete with internal steel reinforcement

• Slotted on both sides for intermediate panel runs

• Natural grey finish with a smooth, uniform profile

• Designed to last decades without the need for treatment

Installation Guidance

For the best results, dig a hole roughly 600mm deep and 200mm wide, allowing enough depth for secure fixing. A small layer of gravel at the base can improve drainage. Use Postcrete to set the post and check with a spirit level before it sets.

Once installed, simply slide your panels and concrete gravel boards into place. This dry cast post is ideal for use in conjunction with 6FT Closeboard Panels and other standard fencing options.

For full installation guidance, see our step-by-step guide:
Installing Closeboard Fencing

The post 8ft (2.4m) Slotted Intermediate Concrete Fence Post – Dry Cast appeared first on Clarke Fencing.

Manufactured using a robust dry cast method and internally reinforced with steel, this post ensures long-term stability without the risk of rotting, warping, or splitting. It’s a popular choice among landscapers, contractors, and homeowners seeking extra peace of mind.

Compatible With

Use this 7FT post for stronger, taller fencing systems including:

• Closeboard Fence Panels – particularly 5FT and 5FT 6in panels

• Lap Panels

• Concrete Gravel Boards

• Postmix – allow 1.5–2 bags per post

• Other Concrete Fence Post Sizes

Key Features

• 7FT (2.1M) dry cast post with twin slots

• Suits tall fence panels or deeper set requirements

• Perfect for use on soft or uneven ground

• Internally steel reinforced for heavy-duty use

• Maintenance-free with long lifespan

Installation Guidance

Excavate a post hole approximately 600mm deep and 200–250mm wide. Drop the post in, align it with a string line or level, and backfill using Postcrete. This post height is ideal when you need extra burial depth or are working on slopes where maintaining consistent panel height is important.

For extra guidance, explore:
How to Choose and Install Closeboard Fence Panels

The post 7ft (2.1m) Slotted Intermediate Concrete Fence Post – Dry Cast appeared first on Clarke Fencing.

This post is built for strength and longevity using dry cast concrete and internal steel reinforcement, providing years of maintenance-free boundary protection.

Compatible With

• Closeboard Fence Panels

• Lap Panels

• Concrete Gravel Boards

• Postmix – 2+ bags per post

• Other Concrete Fence Post Sizes

Key Features

• 9FT (2.7M) dry cast end post

• One-sided slot for terminating fencing runs

• Heavy-duty design with steel core

• Perfect for high fencing or slopes

• Long-lasting and weather resistant

Installation Tips

Excavate at least 600mm deep and use Postcrete to secure the post. Ideal for fencing that transitions in height or terrain.

How to Choose and Install Closeboard Fence Panels
Installing Concrete Posts on a Slope

The post 9ft (2.7m)Slotted End Concrete Fence Post – Dry Cast appeared first on Clarke Fencing.

Its extended height makes it ideal for supporting 6FT tall fence panels or for installations on sloped terrain where a longer post is needed to account for stepped panel levels. Built using a dry cast method and internally reinforced with steel, it offers long-lasting strength, crack resistance, and zero maintenance—perfect for exposed or high-traffic locations.

Compatible With

This corner post works best with:

• Closeboard Fence Panels – especially 6FT and 5FT 6in heights

• Lap Panels

• Concrete Gravel Boards

• Postmix – use 2 bags per post

• Other Concrete Fence Post Sizes

Key Features

• 8FT (2.4M) post with two slots at 90°

• Ideal for turning corners in tall fencing runs

• Suitable for standard 6FT panel widths

• Reinforced with steel for added strength

• Dry cast finish, rot-proof and maintenance-free

Installation Guidance

Excavate a hole around 600mm deep and 200–250mm wide. Set the post using Postcrete for fast and reliable fixing. Ensure the slot faces align with your planned fencing direction, and allow to fully set before inserting panels. Add a concrete gravel board at the base for improved durability.

For installations involving a stepped layout on sloped terrain, this post provides the extra length required to support each transition. For more guidance on fencing on a slope, see:
Installing Concrete Posts on a Slope

Further Reading

• How to Choose and Install Closeboard Fence Panels

The post 8ft (2.4m) Slotted Corner Concrete Fence Post – Dry Cast appeared first on Clarke Fencing.

Its compact 1.8M length suits fence panels between 3FT and 4FT high, offering a solid, discreet support system for decorative or practical garden fencing. Manufactured using the dry cast method and reinforced with internal steel, it provides years of maintenance-free strength with excellent resistance to rot, moisture, and impact.

Compatible With

This post is ideal for use with:

• Closeboard Fence Panels

• Lap Panels

• Concrete Gravel Boards

• Postmix – use 1.5 bags per post

• 7FT Slotted Intermediate Concrete Fence Post

Key Features

• 6FT (1.8M) post with two slots at a right angle

• Ideal for low corner fencing installations

• Dry cast concrete for consistent finish and strength

• Steel reinforced and built to last decades

• Requires minimal maintenance

Installation Guidance

Dig a hole approximately 600mm deep and 200–250mm wide. Add gravel to the base if required for drainage. Position the post precisely at the 90° turn point and use a level to ensure it’s plumb in both directions. Set it with Postcrete and allow it to cure before sliding in your panels. We recommend pairing it with a concrete gravel board for best protection and alignment. Need more sizes? Check out our full range of concrete fence posts

Additional Guidance

Need help planning your fence layout?

How to Choose and Install Closeboard Fence Panels

The post 6ft (1.8m) Slotted Corner Concrete Fence Post – Dry Cast appeared first on Clarke Fencing.