The gate is fully framed, ledged and braced using planed timber framing. Three horizontal rear rails support the cladding, while two diagonal braces help the frame retain its shape. The smoother framing provides a defined surround to the traditional feather edge face.

A timber cap is included across the top, covering the upper board ends and finishing the gate’s outline. This combination of planed framing and capping suits entrances where both screening and a neat timber finish are priorities.

The green/natural pressure-treated timber is suitable for outdoor use and coordinates with similarly treated fencing. Its knots, grain and natural shade variations remain visible. Our feather edge boards can be used for adjoining fence sections, and other gate dimensions can be found in our feather edge gates range.

Calculate the opening around the 1.2m gate width and the allowances needed for hinges, a latch and working clearance. Check the available swing space and the clear width needed for any garden equipment. Use gate posts and garden gate furniture suited to the gate’s size, weight and exposure, particularly on an open or windy boundary.

The post Green 1.75m x 1.2m Capped Elite Feather Edge Garden Gate (Haughley) appeared first on Clarke Fencing.

The Haughley is fully framed, ledged and braced with planed timber framing. This low-height version uses a top and bottom rear rail with two A-frame braces. Each diagonal meets the top rail separately near the centre and runs down towards a lower corner, using the same timber section as the surrounding frame.

Timber capping is included across the top, covering the board ends and giving the gate a neat finish. The planed frame has a smoother surface, while the feather edge boards retain their traditional textured appearance.

Its brown pressure-treated timber is suitable for outdoor garden use. Natural knots, grain and colour variations remain visible, helping it sit alongside other timber fencing. For adjoining sections in the same style, explore our feather edge boards.

Allow extra space beyond the 900mm gate width for hinges, a latch and operating clearance when positioning the gate posts. Check that the gate can clear the ground throughout its swing, and choose fittings from our garden gate furniture range. Higher options for greater screening are available in our feather edge gates collection.

The post Brown 0.85m x 0.9m Capped Elite Feather Edge Garden Gate (Haughley) appeared first on Clarke Fencing.

The fully framed, ledged and braced construction uses planed timber framing for a smoother finish. Three horizontal rear rails support the boards, with two diagonal braces helping the gate retain its shape. The framing surrounds the feather edge cladding to give the wider gate a defined outline.

A timber cap is included across the top. It covers the upper edge of the boards and completes the gate’s appearance, while the textured cladding retains the grain and knots associated with natural timber.

The brown pressure-treated finish is intended for outdoor use and works alongside brown fencing and other garden timber. To continue the same boundary style, browse our feather edge boards. Narrower and lower alternatives are available within our feather edge gates collection.

The 1.2m measurement is the gate width, so allow additional space for the selected hinges, latch and operating clearance. Check the equipment you intend to move through the entrance and leave enough room for the gate to swing. Choose gate posts and garden gate furniture suited to the size and weight of this wider, solid gate.

The post Brown 1.75m x 1.2m Capped Elite Feather Edge Garden Gate (Haughley) appeared first on Clarke Fencing.

The Haughley is fully framed, ledged and braced, with planed timber framing for a smoother finish. This height uses two horizontal rear rails and A-frame bracing. Both diagonals use the same timber section as the surrounding frame and meet the top rail separately near its centre, extending down towards the lower corners.

A timber cap is included across the top, covering the upper edge of the boards and giving the gate a defined, finished outline. The smooth framing contrasts with the textured feather edge cladding, while natural knots and grain remain visible.

The timber is pressure treated for outdoor use and has a brown finish to coordinate with similarly finished fencing. For adjoining sections, explore our feather edge boards. Allow for natural variations in timber shade when matching a new gate to an existing fence.

The gate width is 900mm, so the opening must also allow for hinges, a latch and working clearance. Set suitable gate posts upright and check the ground clearance through the gate’s swing. Choose fittings from our garden gate furniture range, or compare other sizes in our feather edge gates collection.

The post Brown 1.15m x 0.9m Capped Elite Feather Edge Garden Gate (Haughley) appeared first on Clarke Fencing.

The Haughley is fully framed, ledged and braced with planed timber framing. Its three horizontal rear rails support the boards across the height of the gate, and two diagonal braces help keep the frame square. The smooth framing gives the gate a more finished outline around the textured feather edge cladding.

Included timber capping covers the upper board ends and provides a continuous top edge. Together with the planed frame, it gives this Elite gate a neat appearance for an entrance that is visible from the garden or house.

The timber is pressure treated for outdoor use with a green/natural finish. Grain, knots and differences in colour remain visible, and the shade will change as the timber weathers. It can be paired with green-treated fencing built from our feather edge boards.

Allow for the 900mm gate width plus the clearances required by the chosen hardware. Use suitable gate posts and select hinges and a latch from our garden gate furniture range to suit the gate and opening direction. Other sizes and brown-finished alternatives are available in our feather edge gates collection.

The post Green 1.75m x 0.9m Capped Elite Feather Edge Garden Gate (Haughley) appeared first on Clarke Fencing.

The gate is fully framed, ledged and braced with planed timber framing. At this height, the rear construction uses three horizontal rails and two diagonal braces. The rails support the cladding across the gate, while the bracing helps keep the frame square during use.

Included timber capping runs across the top, covering the upper board ends and completing the gate’s outline. The planed framing provides a smoother surface around the feather edge cladding, making the Elite design useful where the finish of the entrance is a particular consideration.

Its brown pressure-treated timber is suitable for outdoor use and coordinates with brown fencing. Knots, grain and differences in shade remain part of its natural appearance. Matching the fencing style is straightforward with our feather edge boards, while other gate sizes can be compared in the feather edge gates range.

Plan the opening around the 900mm gate width plus the allowances required by the chosen fittings. Suitable gate posts should support the gate upright, with clearance beneath for its full swing. Select hinges and a latch from our garden gate furniture range to suit the gate, posts and opening direction.

The post Brown 1.45 x 0.9m Capped Elite Feather Edge Garden Gate (Haughley) appeared first on Clarke Fencing.

The fully framed, ledged and braced construction uses sawn timber framing. Three horizontal rails support the boards across the back, with two diagonal braces helping the frame retain its shape. The sawn surface gives the framing a textured finish, and the straight top is supplied without capping.

The brown pressure-treated timber is intended for outdoor use and sits naturally alongside brown closeboard fencing. Individual boards retain their own knots, grain and colour variations. Our feather edge boards can be used to build adjoining fencing in the same style.

Allow for the complete installation when setting out the entrance. A 1.2m-wide gate requires additional space for fittings and operating clearance, so the post-to-post opening should be calculated around the chosen hardware. Use gate posts suited to the gate’s size and weight, and check that there is room for the wider leaf to swing.

Choose this version where both screening and a wider access route matter. Hinges and latches should suit the gate and supporting posts; options are available in our garden gate furniture range. You can compare narrower and lower alternatives within our feather edge gates.

The post Brown 1.75m x 1.2m Feather Edge Garden Gate (Ickworth) appeared first on Clarke Fencing.

The fully framed, ledged and braced construction uses planed timber framing. A top and bottom rear rail are supported by two A-frame braces. The diagonals use the same timber section as the surrounding frame and meet the top rail separately near its centre before extending down towards the lower corners.

Included timber capping covers the upper board ends and completes the top of the gate. The smooth framing gives the Elite design a neat outline, while the overlapping feather edge boards retain the traditional closeboard appearance.

The timber is pressure treated for outdoor use and has a brown finish to coordinate with similarly finished fencing. Knots, grain and differences in shade are natural features of the wood. Our feather edge boards can be used to continue the same fencing style along the boundary.

Set the opening to accommodate the 1.2m gate width, the selected fittings and operating clearance. Suitable gate posts should support the gate upright, with enough space for its full swing. Choose hinges and a latch from our garden gate furniture range, or compare taller alternatives in our feather edge gates collection.

The post Brown 1.15m x 1.2m Capped Elite Feather Edge Garden Gate (Haughley) appeared first on Clarke Fencing.

The Ickworth is fully framed, ledged and braced, with sawn timber framing that gives it a traditional, textured finish. Three horizontal rear rails support the cladding at the top, middle and bottom, while two diagonal braces help keep the frame square. This is the uncapped design, with a straight top formed by the feather edge boards.

The timber is pressure treated for outdoor use and has a brown finish that coordinates with brown fencing and garden timber. Knots, grain patterns and variations in shade are part of its natural appearance. For a continuous boundary, combine it with fencing built from our feather edge boards.

Measure the opening before installing the posts. The 900mm dimension is the gate width; the space between posts must also accommodate the hinges, latch and operating clearance. Choose suitable gate posts and install them upright, allowing enough ground clearance for the gate to swing freely.

This size suits everyday pedestrian access alongside a taller fence line. Select hinges and a latch appropriate to the gate, posts and opening direction from our garden gate furniture. Other sizes and finishes are available within our feather edge gates range.

The post Brown 1.75m x 0.9m Feather Edge Garden Gate (Ickworth) appeared first on Clarke Fencing.

This Ickworth gate is fully framed, ledged and braced with sawn timber framing. Its lower height uses a top and bottom rear rail with two A-frame braces. The diagonals run from separate points near the centre of the top rail down towards the lower corners, using the same timber section as the surrounding frame. The top is uncapped.

Pressure-treated timber and a brown finish make it suitable for outdoor garden use. The sawn framing and overlapping boards retain a traditional timber appearance, with natural knots and grain variations. It can be paired with a lower boundary built from our feather edge boards.

The 1.2m width offers additional room for moving garden equipment, although the usable opening will depend on the installation. Allow extra space for hinges, a latch and operating clearance when positioning the gate posts. Check the ground level through the full swing so the gate can open without catching.

This size is useful where you want a defined entrance with a solid lower boundary. Choose suitable hinges and a latch from our garden gate furniture range. Taller options for greater screening are available within our feather edge gates collection.

The post Brown 1.15m x 1.2m Feather Edge Garden Gate (Ickworth) appeared first on Clarke Fencing.