This 3.6m green cant rail is the longest standard size available, ideal for wide spans or when you want to position posts at closer centres for extra strength. It’s pressure treated to UC4 standards for long-term durability in outdoor environments, including ground contact. Made using the (2EX) method, each rail is cut from 125mm x 47mm timber and finishes at approximately 75mm x 47mm with a chamfered top edge for effective rainwater runoff.

For a professional and uniform installation, cant rails are mounted so that two rails meet at the centre of each post. This ensures strength, symmetry, and a seamless look across the full fence line.

Fixings can include 100mm galvanised nails into wooden posts, or timber screws and cup square bolts when installing with concrete systems.

Specifications

• Size: 3.6m (length) x 75mm x 47mm (approx. finished size)

• Cut from 125mm x 47mm timber using the 2EX method

• Chamfered top edge for water drainage

• Pressure treated green (UC3)

• Suitable for traditional timber or concrete fence builds

Installation Systems

Traditional Timber System

Pair with wooden fence posts, gravel boards, and featheredge boards to achieve a strong and natural fencing solution. Enhance longevity using Post Saver Sleeves at the base of posts.

Heavy-Duty Concrete System

For rot-proof performance, use with concrete recessed posts and concrete gravel boards, secured with timber screws or bolts.

Rail Guidance by Fence Height

• 2.4m and above: 4 rails

• 1.8m and 1.5m: 3 rails

• 1.2m: 2 rails

Materials related to “Cant Rail”

• Featheredge Boards – Tapered boards used to form the vertical face of closeboard fencing.

• Wooden Fence Posts – Compatible posts for use in traditional fencing builds.

• Concrete Fence Posts – Rot-resistant posts ideal for high-durability closeboard systems.

• Gravel Boards – Protects the base of the fence and adds structural height.

• Post Saver Sleeves – A cost-effective solution for extending timber post life at ground level.

• Postcrete – Ready-mix concrete used to fix posts securely in place.

How do you install cant rails?

Install so that two cant rails join at the centre of each post for a consistent and robust layout. Always mount the chamfered edge facing out and slightly upward to promote water runoff. Use galvanised nails, timber screws, or bolts depending on your post type.

The post 3.6m Cant Rail – Pressure Treated Green appeared first on Clarke Fencing.

This 3.6m cant rail is ideal for constructing longer or reinforced closeboard fencing runs. It is UC4 pressure treated in brown for maximum protection against rot and decay, especially in exposed outdoor environments. Cut using the (2EX) method from a 125mm x 47mm timber section, it finishes at approximately 75mm x 47mm with a chamfered edge for water runoff.

Each cant rail is installed so that it overlaps halfway onto the fence post, allowing the next rail to join cleanly in the centre. This consistent post-to-post layout maintains strength and visual uniformity across the entire fence line. The 3.6m length is best suited to post centres of 1.8m for added structural strength.

Use 100mm galvanised nails for timber posts, or alternatively, fix with timber screws or cup square bolts if using concrete recessed posts.

Specifications

• Size: 3.6m (length) x 75mm x 47mm (approx. finished size)

• Cut using 2EX method from 125mm x 47mm timber

• Chamfered top edge for drainage

• UC4 pressure treated brown finish

• Suitable for timber and concrete fencing systems

Installation Systems

Traditional Timber System

Combine with wooden fence posts, timber gravel boards, and featheredge boards to create a classic closeboard fence. For extended lifespan, Post Saver Sleeves can be used to protect posts at the vulnerable ground level.

Heavy-Duty Concrete System

Use with concrete recessed posts and concrete gravel boards for a rot-proof, maintenance-free structure. Fix cant rails into recessed posts using cup square bolts or strong timber screws.

Rail Guidance by Fence Height

• 2.4m and above: 4 rails

• 1.8m and 1.5m: 3 rails

• 1.2m: 2 rails

Materials related to “Cant Rail”

• Featheredge Boards – Tapered boards used to form the vertical face of closeboard fencing.

• Wooden Fence Posts – Compatible posts for use in traditional fencing builds.

• Concrete Fence Posts – Rot-resistant posts ideal for high-durability closeboard systems.

• Gravel Boards – Protects the base of the fence and adds structural height.

• Post Saver Sleeves – A cost-effective solution for extending timber post life at ground level.

• Postcrete – Ready-mix concrete used to fix posts securely in place.

How do you install cant rails?

Start at the bottom of your fence line and work upward, spacing rails evenly based on your desired finish height. Position each cant rail so it overlaps halfway onto the face of the post, allowing two rails to join at the centre. Fix securely with nails, screws, or bolts depending on the post material. Ensure the chamfered edge faces outward and upward to deflect water.

The post 3.6m Cant Rail – Pressure Treated Brown appeared first on Clarke Fencing.

This 3.0m pressure treated green cant rail is an ideal choice for longer fencing runs or when you want extra flexibility in post spacing. Treated to UC4 standard, it’s suitable for use in ground-contact areas and high-moisture environments. Manufactured from 125mm x 47mm timber using the (2EX) method, each rail finishes approximately 75mm x 47mm with a chamfered edge for water runoff.

The longer 3.0m length makes it suitable for wider post centres or cutting to size on-site. Cant rails should be installed with two lengths meeting at the centre of each post for uniformity across your closeboard fencing.

Fix to wooden posts using 100mm galvanised nails, or use timber screws or cup square bolts if installing into concrete recessed posts.

Specifications

• Size: 3.0m (length) x 75mm x 47mm (approx. finished size)

• Cut from 125mm x 47mm timber using the 2EX method

• Chamfered edge for water drainage

• UC4 pressure treated in green

• Suitable for use in both wooden and concrete fencing systems

Installation Systems

Traditional Timber System

Install alongside wooden posts, gravel boards, and featheredge boards for a classic appearance. Consider Post Saver Sleeves for cost-effective rot prevention at ground level.

Heavy-Duty Concrete System

Pair with concrete recessed posts and concrete gravel boards to create a high-strength, rot-proof structure. Fix using screws or bolts.

Rail Guidance by Fence Height

• 2.4m and above: 4 rails

• 1.8m and 1.5m: 3 rails

• 1.2m: 2 rails

Materials related to “Cant Rail”

• Featheredge Boards – Tapered boards used to form the vertical face of closeboard fencing.

• Wooden Fence Posts – Compatible posts for use in traditional fencing builds.

• Concrete Fence Posts – Rot-resistant posts ideal for high-durability closeboard systems.

• Gravel Boards – Protects the base of the fence and adds structural height.

• Post Saver Sleeves – A cost-effective solution for extending timber post life at ground level.

• Postcrete – Ready-mix concrete used to fix posts securely in place.

How do you install cant rails?

Mount each rail so that two lengths meet at the centre of every post, creating a consistent and clean finish. Position with the chamfered edge facing outwards and slightly upward to shed rainwater. Use 100mm galvanised nails for timber posts or opt for timber screws/cup square bolts with concrete systems.

The post 3.0m x Cant Rail – Pressure Treated Green appeared first on Clarke Fencing.

This 3.0m cant rail is pressure treated to UC4 standard in a brown finish, ideal for closeboard fencing installations that demand extra strength and extended bay widths. Cut using the (2EX) method, two cant rails are produced from a single 125mm x 47mm timber length. The resulting board measures approximately 75mm x 47mm and features a chamfered top edge for water runoff.

Cant rails are fitted so that each length sits half on a fence post, allowing two rails to join centrally and maintain a consistent, uniform line along the fence run. Fix in place using 100mm galvanised nails for timber posts, or use timber screws or cup square bolts if installing into concrete recessed posts.

This 3.0m length is often used with post centres of either 3.0m or reduced to 1.8m when additional strength is required.

Specifications

• Size: 3.0m (length) x 75mm x 47mm (approx. finished size)

• Original cut: 2EX from 125mm x 47mm timber

• Chamfered top edge

• UC4 pressure treated brown finish

• Compatible with traditional timber or heavy-duty concrete fencing systems

Installation Systems

Traditional Timber System

Use with wooden fence posts and wooden gravel boards for a classic, fully timber build. Pair with post saver sleeves for rot protection at ground level.

Heavy-Duty Concrete System

Install with concrete recessed posts and concrete gravel boards for a long-lasting, rot-proof framework. Fix cant rails using bolts or exterior-rated screws into pre-drilled concrete posts.

Rail Guidance by Fence Height

• 2.4m and above: 4 rails

• 1.8m and 1.5m: 3 rails

• 1.2m: 2 rails

Materials related to Wooden Cant Rail

• Featheredge Boards – Tapered boards used to form the vertical face of closeboard fencing.

• Wooden Fence Posts – Compatible posts for use in traditional fencing builds.

• Concrete Fence Posts – Rot-resistant posts ideal for high-durability closeboard systems.

• Gravel Boards – Protects the base of the fence and adds structural height.

• Post Saver Sleeves – A cost-effective solution for extending timber post life at ground level.

• Postcrete – Ready-mix concrete used to fix posts securely in place.

How do you install cant rails?

To install cant rails, ensure each rail spans between posts and sits halfway onto each post face. This allows for the next rail to continue from the same point. Start at the bottom and space additional rails evenly upward, fixing securely using nails, screws, or bolts depending on your post type. Be sure to align the chamfered edge facing upward and outward for proper water runoff.

The post 3.0m Cant Rail – Pressure Treated Brown appeared first on Clarke Fencing.

This 2.4m cant rail is ideal for constructing closeboard fencing and provides a strong, rot-resistant horizontal support for feather edge boards. Pressure treated to UC4 standard in green, it’s suitable for use in ground-contact areas or exposed conditions. Each cant rail is cut from a 125mm x 47mm section of timber using the (2EX) method, producing two finished rails with a chamfered edge. Final dimensions are approximately 75mm x 47mm.

Rails are fitted so that they meet centrally on each post — each rail sitting halfway across — ensuring uniform alignment and maximum strength. The 2.4m length is commonly used with posts spaced at 2.4m centres, making installation straightforward.

Fix in place using 100mm galvanised nails when using wooden posts, or opt for timber screws or cup square bolts with concrete recessed post systems.

Specifications

• Size: 2.4m (length) x 75mm x 47mm (finished size approx.)

• Cut from 125mm x 47mm timber using the 2EX method

• Chamfered edge promotes water runoff

• Pressure treated to UC4 standard in green

• Suitable for both traditional and concrete fencing systems

Installation Systems

Traditional Timber System

Build your fence with wooden posts, timber gravel boards, and featheredge boards for a classic aesthetic. Add Post Saver Sleeves for cost-effective post protection at ground level.

Heavy-Duty Concrete System

Use concrete recessed posts and concrete gravel boards with your cant rails for a robust and long-lasting alternative. Fix using cup square bolts or timber screws.

Rail Guidance by Fence Height

• 2.4m and above: 4 rails

• 1.8m and 1.5m: 3 rails

• 1.2m: 2 rails

Materials related to Timber Cant Rail

• Featheredge Boards – Tapered boards used to form the vertical face of closeboard fencing.

• Wooden Fence Posts – Compatible posts for use in traditional fencing builds.

• Concrete Fence Posts – Rot-resistant posts ideal for high-durability closeboard systems.

• Gravel Boards – Protects the base of the fence and adds structural height.

• Post Saver Sleeves – A cost-effective solution for extending timber post life at ground level.

• Postcrete – Ready-mix concrete used to fix posts securely in place.

How do you install cant rails?

Measure and mark your rail positions on each post. Position each cant rail so that it meets halfway across the face of the post — this ensures adjacent rails join neatly at the post centre. Fix securely using 100mm galvanised nails for timber posts, or screws/bolts if installing into concrete. Always install with the chamfered edge facing out and upwards to aid rainwater runoff.

The post 2.4m Cant Rail – Pressure Treated Green appeared first on Clarke Fencing.

This 2.4m cant rail is a key structural component for building traditional closeboard fencing. UC4 pressure treated in brown, it offers reliable resistance to rot and is ideal for domestic and commercial fencing applications. The timber is cut using the (2EX) method from a 125mm x 47mm section, resulting in a finished size of approximately 75mm x 47mm with a chamfered edge to help shed water.

Cant rails should be positioned so that they sit halfway across the fence post. This allows the next rail to join seamlessly at the post centre, creating a strong and visually consistent fencing line. The 2.4m length works well with matching post spacing or can be cut down for custom bays.

Fix using 100mm galvanised nails for timber posts, or upgrade to timber screws or cup square bolts when using concrete recessed posts.

Specifications

• Size: 2.4m (length) x 75mm x 47mm (approx. finished size)

• Cut from 125mm x 47mm timber using the 2EX method

• Chamfered top edge for drainage

• UC4 pressure treated brown

• Compatible with both timber and concrete fencing systems

Installation Systems

Traditional Timber System

Combine with wooden fence posts, timber gravel boards, and featheredge boards for a timeless closeboard fence design. Boost longevity by applying Post Saver Sleeves to ground-level post sections.

Heavy-Duty Concrete System

Match with concrete recessed posts and concrete gravel boards for a longer-lasting, low-maintenance installation. Secure rails with bolts or screws into the concrete post recesses.

Rail Guidance by Fence Height

• 2.4m and above: 4 rails

• 1.8m and 1.5m: 3 rails

• 1.2m: 2 rails

Materials related to “Cant Rail”

• Featheredge Boards – Tapered boards used to form the vertical face of closeboard fencing.

• Wooden Fence Posts – Compatible posts for use in traditional fencing builds.

• Concrete Fence Posts – Rot-resistant posts ideal for high-durability closeboard systems.

• Gravel Boards – Protects the base of the fence and adds structural height.

• Post Saver Sleeves – A cost-effective solution for extending timber post life at ground level.

• Postcrete – Ready-mix concrete used to fix posts securely in place.

How do you install cant rails?

Start by marking post heights and rail positions. Fix each cant rail so it sits halfway onto the face of the post, allowing a continuous joint at the post centre. Begin with the bottom rail and space upwards evenly. Ensure the chamfered edge faces outwards and up for water runoff. Use 100mm nails, screws, or bolts depending on the fencing system.

The post 2.4m Cant Rail – Pressure Treated Brown appeared first on Clarke Fencing.