Jacksons Venetian Hit & Miss Panels

Full Description

VENETIAN HIT & MISS FENCE PANELS

A variation on the Venetian fence panel theme, and just like that style panel; our Venetian Hit and Miss looks contemporary and sleek, complementing the suburban garden as well as more traditional style gardens beautifully – and there the resemblance ends – in the battle for more light, versus less privacy, the Venetian Hit and Miss panel wins on both counts.

The horizontal slats that are usually only on the front of Venetian are also on the other side, these are fixed to cover the space between the slats on the first side with the slats alternating, in much the same way as hit and miss panels are made. Which means some air and light can still pass through, but the view through is obscured. Another big benefit is they are ‘good both sides’ so you and your neighbours don’t have a view of rails, which can be a bone of contention.

The additional slates required to make these panels ‘good-both-sides’, also makes them quite heavy, so for ease of handling we offer them in two heights both at 1.83m wide supplied along with a panel width cut-down kit. To achieve a taller fence, the panels can be stacked – for example stacking two 0.907m panels will give you 1.807m high plus 140mm gravel board gives a total fence height of 1.97m 

The panels are designed for use with slotted Jakposts and gravel boards.

We recommend using capping rails to add the finishing touch to these frameless panels. For mathcing garden gates please speak to our sales team.

Please note: we do not manufacture 1.83m x 1.83m Venetian Hit and Miss panels. Combining 2 x 0.907m panels will give you a fence height of 1.8m but you must add a gravel board in order for our 25 year guarantee to be valid making the total fence height  1.95m. 

If you include a capping rail that will add another 20mm to the overall fence height

Taller variants can be achieved by stacking these panels, up to 2.4m tall, using heavy slotted posts. Please note you may require planning permission from your local planning department if you fence height exceeds 2m, so please do check.

If you need a narrower panel to complete your fence, it is fine to cut a panel to the correct size on site. Please remember to treat any cut ends with Jakcure treatment.

Common fence panel combinations:

• 2 x 0.907m panels + 140mm gravel board = 1954mm fence
• 1 x 0.907m & 1 x 0.607m + 140mm gravel board = 1654mm fence

  Specification

Horizontal Slats 45mm x 16mm

Gap between slats is 30mm  (which is larger than standard venetian, therefore the panels do not match)

Panels can be stacked to create higher fence