RL6/50/5 High Tensile Otter Fencing Ground Skirt (Light)

Full Description

RL6/50/5 High Tensile Otter Fencing Ground Skirt

RL19/180/5 C14 combined with RL6/50/5 C5 is designed as a twopiece otter fence for installation in areas of restricted accessibility. 
This enables the RL6/50/5 (ground skirt) to be installed before the 
intermediate posts and RL19/180/5 (top net) are installed. The 
two nets are connected with netting clips. Zinc and zinc aluminium 
coated agricultural fence service life can be affected significantly 
when exposed to extremely acidic or saline environments and this 
factor should be considered when designing your fence installation. 
For typical service life to be achieved it is recommended that the 
product must be installed in an atmosphere with corrosively class 
C1, C2 or C3 (very low/low/medium) in accordance with ISO 9223 
and must not come into contact with substances that will accelerate 
corrosion, including but not limited to fertilisers, pesticides, 
herbicides, salt water and soils of pH lower than 5.5. Particularly 
at sites with peaty and wet ground conditions it is recommended 
that you have the soil pH tested prior to designing your installation. 
The nets have pre-stripped ends for ease of joining. It features solid 
vertical wires and the unobtrusive high pressure bonded Torus knot 
which does not have any sharp edges.

See below our Tornado Wire data sheet as they provide detailed information for individual fencing products.Information provided for each fence product includes detailed product specification, application advice, line wire and perspective diagrams, knot type details and a list of related products.

RL6/50/5