How to Use EASYJoint: Step-by-Step Installation Guide
EASYJoint is designed to make patio jointing fast, simple, and reliable. By following the correct installation process, you can achieve a clean, durable finish that allows water to drain naturally through the joints.
This guide breaks down each step clearly, based on manufacturer recommendations, so you get the best results every time.
Before You Start
Before opening the product, check the following:
- Joints must be at least 3mm wide
- Joints must be at least 20mm deep
- The paving must be laid on a free-draining base
- All joints should be clean and free from debris
Taking the time to prepare properly will ensure the jointing compound performs as intended.
Step 1: Pre-Soak the Paving
For best results, especially with natural stone paving
- Thoroughly soak the entire area with water
- Ensure both slabs and joints are fully saturated
This step is essential. A wet surface helps prevent staining and allows the EASYJoint to flow properly into the joints.
Step 2: Pour the EASYJoint
Once the paving is fully soaked:
- Cut open the bag or tub
- Pour the EASYJoint directly onto the wet paving surface
Work in manageable sections to maintain control during application.
Step 3: Wet to Create a Slurry
- Apply water directly onto the EASYJoint
- Mix it into a wet slurry consistency
This activates the compound and allows it to move freely into the joints.
Step 4: Sweep Into the Joints
Using a stiff brush or squeegee:
- Sweep the compound diagonally across the paving
- Push it firmly into all joints while continuing to add water
⚠️ Work quickly and avoid leaving the compound sitting in piles.
Top Tip:
It is much easier with two people
- One sweeping the compound
- One applying water
Step 5: Top Up the Joints
- Check all joints are fully filled
- Add more EASYJoint where needed
- Repeat the wetting and sweeping process
Top Tip:
In warm weather, paving can dry quickly. Always keep the surface wet during installation.
Step 6: Final Rinse
- Rinse the entire area thoroughly with clean water
- Wash off all excess residue from the slab surface
This step is crucial to prevent staining and to help settle the compound into the joints.
Top Tip:
Reduce wastage by saving unused product. Submerge it in approximately 2 inches of water to keep it usable.
Step 7: Pointing
For a smoother, more defined finish:
- Use a pointing tool or jointing iron
- Strike the joints to compact and shape them
This step improves both the appearance and long-term strength of the joint.
Aftercare and Drying Time
- Avoid foot traffic for at least 24 hours
- Full curing may take several days depending on weather conditions
Cool or damp conditions will slow curing, while warm weather will speed it up.
Key Things to Remember
- Always work on a wet surface
- Keep the paving wet throughout installation
- Ensure joints meet minimum width and depth
- Clean thoroughly to avoid residue marks
- Only use on a free-draining base
Final Thoughts
EASYJoint is one of the quickest and most effective ways to joint a patio, but correct installation is key to achieving a strong, long-lasting result.
By following this step-by-step process, you can create a clean, professional finish that enhances both the look and durability of your paving.
Want to find out more on EASYJoint? Read our full guide – What is EASYJoint? The Complete Guide to Patio Jointing Compound
