Showing all 8 resultsSorted by popularity
Showing all 8 resultsSorted by popularity
Help protect wooden fence and gate posts against ground-line decay with Postsaver sleeves and wraps from Clarke Fencing. These products create a protective barrier around the area where the post meets the ground, helping shield timber from the conditions that encourage rot.
Postsaver protection is applied before the post is installed. Its outer layer and heat-activated lining seal around the timber when fitted correctly, making careful positioning and application essential.
Our range includes sleeves for common fence post sections, larger wraps for substantial timber posts and a roll format for cutting to suit the application.
| Square timber post size | Postsaver option |
|---|---|
| 75 × 75mm | Sleeve 004 |
| 100 × 100mm | Sleeve 005 |
| 150 × 150mm | Pro-Wrap Large |
| 200 × 200mm | Pro-Wrap Extra Large |
Pro-Wrap & Tack is also available in a 5m roll. Check its instructions for the required overlap and material allowance when calculating how much you need.
Pair your chosen protection with suitable wooden fence posts or gate posts, checking the actual timber dimensions before ordering.
Follow the instructions for the specific sleeve or wrap. Postsaver identifies a suitable gas blowtorch or hot air gun as application equipment, with a foam roller required to seal the flat faces of square posts. Wrap & Tack also requires equipment for cutting and securing the material.
Our range includes blowtorch and gas cartridge options. Check that you have all the equipment needed before starting, and position the protection relative to the finished ground level as instructed.
Order online for collection from Stowmarket or delivery across our East Anglia delivery area.
Yes. It provides additional protection around the ground line. Continue to select timber with treatment suitable for its intended use, including ground contact where applicable.
Postsaver specifies a suitable hot air gun rated at 2kW or above as an option. Follow its application guidance and use the required roller when sealing protection onto square posts.
The products are designed to protect the specified ground-line zone. Fit them at the position shown in the instructions rather than placing them solely around the bottom end.
Postsaver offers protection suitable for different post shapes. Check the sleeve’s supported diameter or the wrap requirements; square-post dimensions should not be used as a direct guide to round-post compatibility.
© Copyright Clarke Fencing 2026. Reg number 0543 5683. Website design and marketing by Unity Online