Rather Speak to us? Please call 01449 614939


Wooden Gate Posts for Garden, Driveway & Field Gates

Shop wooden gate posts at Clarke Fencing for supporting garden gates, driveway entrances and field gates. Our substantial timber posts provide fixing surfaces for hinges and closing hardware, with different sections and lengths to suit the gate and installation.

The range is supplied in UC4 pressure-treated green timber for ground-contact use. Each post features a four-way weathered top, with sloping faces that help rainwater run off the upper surface.

Post section Length options
150mm x 150mm 2.4m and 3.0m
175mm x 175mm 2.4m
200mm x 200mm 2.4m and 3.0m

Choose the post around the gate’s width, weight, construction and hinge arrangement. Solid gates also present a larger surface to the wind, making site exposure an important consideration. Allow enough post length for both the required height above ground and suitable foundations.

Complete your installation with compatible gate ironmongery, including hinges, catches and latches. Order timber gate posts online for collection from our Stowmarket yard in Suffolk or delivery across East Anglia, including Norfolk, Essex and Cambridgeshire.

Gate Post FAQs

What size wooden gate post do I need?

The correct size depends on the gate’s width and weight, the hinge positions and the ground conditions. A wider gate places greater leverage on its hanging post, while a solid gate can experience substantial wind loading. Compare the available 150mm, 175mm and 200mm sections against the gate supplier’s requirements. Our team can help you select an appropriate option.

Are these gate posts suitable for ground contact?

Yes. These timber gate posts are pressure treated to UC4, the use class for ground contact and exterior structural support. Correct installation and protection of any exposed cuts remain important to the timber’s performance.

Should I choose a 2.4m or 3.0m gate post?

Add the required post height above ground to the installation depth needed for your gate and site. The 3.0m options provide additional length where a taller post or deeper foundation is required. Include the hinge positions and the gate’s ground clearance when planning the installation.

How much space should I leave between gate posts?

The opening must accommodate the gate itself, its hinges, closing hardware and operating clearance. For double gates, include both leaves and the centre gap. Establish the spacing from the actual gate and fittings before setting the posts.

What does a four-way weathered top do?

The top slopes towards all four sides, helping water drain away from the upper end grain. It also provides a shaped finish, so the post does not need a separate decorative cap to achieve that appearance.

When can I hang the gate after installing the posts?

Wait until the concrete or postmix has reached sufficient strength to carry the gate’s load. Follow the product manufacturer’s loading guidance; an initial setting time does not necessarily mean the foundation is ready for a heavy gate. Our gate post installation guide explains the installation sequence and associated fittings.

© Copyright Clarke Fencing 2026. Reg number 0543 5683. Website design and marketing by Unity Online