Description

6FT Slotted End Concrete Fence Post – Dry Cast (1.8M)

Perfect for Finishing Low Fence Runs

The 6FT End Concrete Fence Post – Dry Cast (1.8M) is ideal for terminating fencing lines in front gardens, pathways, or any installation using lower-height fence panels. This post is slotted on one side only, making it perfect for the start or end of a run. It offers a clean, stable finish and long-term performance, even in harsh outdoor conditions.

Dry cast concrete provides a consistent, robust finish, while internal steel reinforcement gives the strength needed to support panels and gravel boards over time. This 6FT post is commonly used with 3FT or 4FT tall fencing, especially in areas with height restrictions or where privacy isn’t a primary concern.

Compatible With

This end post works seamlessly with:

• 3FT 6Inch Heavy Duty Closeboard Fence Panels Pressure Treated Brown  

• 4FT Lap Fence Panels

• 6 Inch Concrete Gravel Boards

• Postmix – use approx. 1.5 bags per post

• 6FT Slotted Corner Concrete Fence Post

Key Features

• 6FT (1.8M) dry cast concrete post with single slot

• Designed for use at the end of a fence run

• Reinforced with internal steel for long-lasting support

• Maintenance-free and rot-resistant

• Natural grey finish for a classic garden look

Installation Guidance

Dig a hole approximately 600mm deep and 250–300mm wide. Add a layer of gravel for drainage, then position the post using a level. Pour in Postcrete and allow it to set firmly. Slot your panel into the recessed side and rest it on a suitable gravel board, if using.

This post is ideal for completing fencing runs with shorter panels. For taller fences, consider viewing our full range of post sizes.

Need More Help?

For more guidance on choosing the right fencing setup for your garden, check out:
How to Choose and Install Closeboard Fence Panels