Description

2.4m x 75mm x 47mm Cant Rail – Pressure Treated Brown

This 2.4m cant rail is a key structural component for building traditional closeboard fencing. UC4 pressure treated in brown, it offers reliable resistance to rot and is ideal for domestic and commercial fencing applications. The timber is cut using the (2EX) method from a 125mm x 47mm section, resulting in a finished size of approximately 75mm x 47mm with a chamfered edge to help shed water.

Cant rails should be positioned so that they sit halfway across the fence post. This allows the next rail to join seamlessly at the post centre, creating a strong and visually consistent fencing line. The 2.4m length works well with matching post spacing or can be cut down for custom bays.

Fix using 100mm galvanised nails for timber posts, or upgrade to timber screws or cup square bolts when using concrete recessed posts.

Specifications

• Size: 2.4m (length) x 75mm x 47mm (approx. finished size)

• Cut from 125mm x 47mm timber using the 2EX method

• Chamfered top edge for drainage

• UC4 pressure treated brown

• Compatible with both timber and concrete fencing systems

Installation Systems

Traditional Timber System

Combine with wooden fence posts, timber gravel boards, and featheredge boards for a timeless closeboard fence design. Boost longevity by applying Post Saver Sleeves to ground-level post sections.

Heavy-Duty Concrete System

Match with concrete recessed posts and concrete gravel boards for a longer-lasting, low-maintenance installation. Secure rails with bolts or screws into the concrete post recesses.

Rail Guidance by Fence Height

• 2.4m and above: 4 rails

• 1.8m and 1.5m: 3 rails

• 1.2m: 2 rails

Materials related to Timber Cant Rail

• Featheredge Boards – Tapered boards used to form the vertical face of closeboard fencing.

• Wooden Fence Posts – Compatible posts for use in traditional fencing builds.

• Concrete Fence Posts – Rot-resistant posts ideal for high-durability closeboard systems.

• Gravel Boards – Protects the base of the fence and adds structural height.

• Post Saver Sleeves – A cost-effective solution for extending timber post life at ground level.

• Postcrete – Ready-mix concrete used to fix posts securely in place.

How do you install cant rails?

Start by marking post heights and rail positions. Fix each cant rail so it sits halfway onto the face of the post, allowing a continuous joint at the post centre. Begin with the bottom rail and space upwards evenly. Ensure the chamfered edge faces outwards and up for water runoff. Use 100mm nails, screws, or bolts depending on the fencing system.