0.9m x 125mm Feather Edge Board – Brown Pressure Treated

Full Description

0.9m x 125mm Feather Edge Board – Pressure Treated Brown

This 0.90m x 125mm brown feather edge board is UC4 pressure treated for durability and ground contact use, ideal for building low-level closeboard fencing such as front boundaries or decorative side returns. Each board is manufactured using the 2EX method, where a 22mm thick board is diagonally cut to create two tapered feather edge pieces. Final board thickness typically ranges from around 15mm at the thickest point to 5mm at the tapered edge, providing excellent overlap, drainage, and structural strength.

This board is often paired with a gravel board to raise the finished fence height to approximately 1.05m (0.90m + 0.15m), helping prevent splashback and rot from ground moisture.

Closeboard fencing built with this board can be installed using either of the following systems:

• Traditional Timber System – Wooden fence posts, cant rails, and wooden gravel boards offer a classic look.

• Heavy-Duty Concrete System – For maximum longevity, use concrete recessed posts and concrete gravel boards with timber cant rails. This system is ideal for high-traffic or moisture-prone areas where timber alone may eventually degrade.

Specifications:

• Size: 0.90m (length) x 125mm (width)

• Tapered thickness: ~15mm to 5mm (originally 22mm pre-cut)

• 2EX feather edge profile

• Pressure treated brown (UC4)

• Ideal for traditional or concrete closeboard fencing setups

Materials related to “Feather Edge Board”:

• Cant Rails – Supports feather edge boards horizontally for a strong framework.

• Wooden Fence Posts – Timber posts suited for a classic closeboard setup.

• Gravel Boards – Helps prevent moisture damage and lifts boards to correct height.

• Post Saver Sleeves – An affordable way to protect timber posts from rot at ground level.

• Closeboard Capping – Adds a finished top edge and helps prolong fence life.

• Gate Posts – Heavier-duty posts suited to hanging closeboard gates.

• Closeboard Gates – Matching gates made from the same feather edge style.