Jacksons Venetian Fencing

Description

VENETIAN FENCE PANELS

Our handcrafted Venetian style fence panels are available in a variety of sizes. Constructed using planed slats for a premium finish, this contemporary style of fencing is one of our most popular designs. These remarkably simple but modern panels are built within a framed system to help perfectly align each individual horizontal pale to allow light through.

Great for creating attractive light effects as the sun moves across your garden throughout the day, these slatted fence panels can be integral to helping you create atmosphere in your outdoor space. The benefits of Venetian panels go beyond improving light conditions; shorter panels can be used as a topper to add extra height and privacy for existing fences and walls, while full height slatted fence panels can act as a slatted screen within your garden, to help hide unsightly items, or create storage areas.

Each horizontal rail is 45mm high x 15mm with a planed smooth finish to allow rain water to drain from the fence.  To meet the conditions of our 25-year Jakcure® guarantee, gravel boards are required when in contact with the ground while any timber cut on site must be treated with Jakcure® Cut Treatment to meet specification.

Constructed from Jakcure® treated softwood, Venetian fencing panels are framed for use with our slotted Jakposts. There are a total of six panel heights available, all at 1.83m wide. We handcraft matching garden gates; either right or left hand hanging when viewed from the front and also provide a range of different widths. We also offer a bespoke service for highly specific scenarios.

Should you need a narrower panel to complete your fence, you are able to cut a panel to the correct size on site. Please remember to cut and treat any cut ends with our Jakcure® Cut Treatment to ensure the product is compliant with our 25-year guarantee.

SPECIFICATION

•    Horizontal rails 45mm high x 15mm wide
•    Vertical bracing uprights 68mm wide x 19mm
•    Gap between horizontal rails is 15mm on all panels apart from 610mm (2ft) high panel which has 17mm spacing between each pale  (which is smaller than standard venetian hit and miss, therefore the panels do not match)

If you require a non standard width panel e.g. to complete your fence run you would need 5 ½ panels, add a cut down kit to your basket in order to be able to cut the panel to the required size. Alternatively, please give us a call to speak to us about ordering a bespoke panel.

We recommend using our slotted Jakposts for intermediates, ends and corners.

Gravel boards need to be used when panels are in contact with the ground as part of the 25 year Jakcure® guarantee.